Évaluations - 5, GPA: 3.4 ( )

Instructions Sony, Modèle KDL-40V2500

Fabricant : Sony
Taille : 7.2 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger

Par ce dispositif a également d'autres instructions :
TV - KDL-40V2500 (35.63 mb)ruplsvsknodafica
TV - KDL-40V2500 (1.33 mb)
TV - KDL-40V2500 (35.37 mb)
TV - KDL-40V2500 (34.68 mb)

Facilité d'utilisation

Design and specifications are subject to change without notice. PC Input Signal Reference Chart Signals Horizontal (Pixel) Vertical (Line) Horizontal frequency (kHz) Vertical frequency (Hz) Standard VGA 640 480 31.5 60 VGA 640 480 37.5 75 VESA 720 400 31.5 70 VGA-T SVGA 800 600 37.9 60 VESA Guidelines 800 600 46.9 75 VESA XGA 1024 768 48.4 60 VESA Guidelines 1024 768 56.5 70 VESA 1024 768 60 75 VESA WXGA 1280 768 47.4 60 VESA 1280 768 47.8 60 VESA 1360 768 47.7 60 VESA • This TV’s PC input does not support Sync on Green or Composite Sync. • This TV’s PC input does not support interlaced signals. • For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be selected automatically. Additional 37 GB Troubleshooting Check whether the 1 (standby) indicator is flashing in red. When it is flashing The self-diagnosis function is activated. 1 Measure how long the 1 (standby) indicator flashes and stops flashing. For example, the indicator flashes for two seconds, stops flashing for one second, and flashes for two seconds. 2 Press 1 on the TV (top side) to switch it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (duration and interval). When it is not flashing 1 Check the items in the tables below. 2 If the problem still persists, have your TV serviced by qualified service personnel. Picture Problem Cause/Remedy No picture (screen is dark) and • Check the aerial connection. no sound • Connect the TV to the mains, and press 1 on the TV (top side). •If the 1 (standby) indicator lights up in red, press "/1. No picture or no menu • Check that the optional equipment is on and press / repeatedly until information from equipment the correct input symbol is displayed on the screen. connected to the scart • Check the connection between the optional equipment and the TV. connector Double images or ghosting • Check aerial/cable connections. • Check the aerial location and direction. Only snow and noise appear on the screen • Check if the aerial is broken or bent. • Check if the aerial has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). Distorted picture (dotted lines or stripes) • Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers or optical equipment. • When installing optional equipment, leave some space between the optional equipment and the TV. • Make sure that the aerial is connected using the supplied coaxial cable. • Keep the aerial cable away from other connecting cables. Picture noise when viewing a TV channel • Select “Manual Programme Preset” in the “Analogue Set-up” menu and adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page 30). Some tiny black points and/or bright points on the screen • The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. No colour on programmes • Select “Reset” in the “Picture” menu to return to the factory settings (page 21). No colour or irregular colour when viewing a signal from the Y, PB/CB, PR/CR jacks of 3 • Check the connection of the Y, PB/CB, PR/CR jacks of 3. • Make sure that the Y, PB/CB, PR/CR jacks of 3 are firmly seated in their respective sockets. 38 GB Sound Problem Cause/Remedy No sound, but good picture •Press 2 +/– or % (Mute). • Check that “Speaker” is set to “On” in the “Set-up” menu (page 27). Noisy sound • See the “Picture noise” causes/remedies on page 38. Channels Problem Cause/Remedy The desired channel cannot be • Switch between digital and analogue mode and select the desired digital/ selected analogue channel. Some channels are blank • Scrambled/Subscription only channel. Subscribe to the Pay Per View service. • Channel is used only for data (no picture or sound). • Contact the broadcaster for transmission details. Digital channel is not displayed • Contact a local installer to find out if digital transmissions are provided in your area. • Upgrade to a higher gain aerial. General Problem Cause/Remedy The TV turns off automatically • Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of (the TV enters standby mode) “On Timer” (page 26). • If no signal is received and no operation is performed in the TV mode for 10 minutes, the TV automatically switches to standby mode. The TV turns on automatically • Check if the “On Timer” is activated (page 27). Some input sources cannot be • Select “AV Preset” in the “Set-up” menu and cancel “Skip” of the input selected source (page 26). The remote does not function • Replace the batteries. Additional 39 GB Index Numerics 1 Digit Direct 29 14:9 14 4:3 Default 25 4:3 14 A Adv. Contrast Enhancer 22 Advanced Settings 22 Aerial, connecting 4 AFT 30 All Reset 27 Analogue Set-up menu...

Ce manuel est également adapté pour les modèles :
TV - KDL-46V2500 (7.2 mb)
TV - KDL-32V2500 (7.2 mb)

Écrivez votre propre critique du dispositif

Texte du message
Votre nom :
Entrez les deux chiffres :