Log:
Téléchargements : 30   Taille : 1 mb   Fabricant : Parkside  
Catégorie : Les machines à rectifier
@name@name@name@name@name@name@name@name

J Provide for sufficient ventilation when working plastics, varnishes and paints. J Do not soak materials or surfaces to be worked with liquids containing solvents. The heat generated during sanding can give rise to vapours that are toxic or hazardous to health. J Avoid sanding lead-based paints or other materials that are hazardous to health. J Material containing asbestos may not be worked. Asbestos is considered to be a carcinogen. J Avoid contact with the moving sanding sheet. J Use the appl

Téléchargements : 2   Taille : 2 mb   Fabricant : Parkside  
Catégorie : Les machines à rectifier
@name

Workplace safety .....................................................................................................Page 7 2.Electrical safety.........................................................................................................Page 7 3. Personal safety..........................................................................................................Page 8 4. Careful handling and use of electrical power tools................................................Page 8 Safet

Téléchargements : 7   Taille : 1 mb   Fabricant : Kompernass  
Catégorie : Les machines à rectifier
@name@name@name@name@name

Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools. f) Keep cutting tools clean and sharp. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. g) Use the electrical power tool, accessories,

Téléchargements : 0   Taille : 627 kb   Fabricant : Kompernass  
Catégorie : Les machines à rectifier
@name

GB / IE Operating and safety instructions: Page 5OscillatinG sander XQ 310 Operating and safety instructions Oscillating sander Komperna. GmbH Burgstra.e 21 D-44867 Bochum (Germany) Validity date of the Information: 06 / 2007 · Ident.-No.: XQ 310-062007-1 / UK / IE Before you begin reading this information, please unfold the page with the illustrations and familiarize yourself with all functions of the tool. GB / IE Operating and safety instructions: Page 5OscillatinG sander XQ 310 Operating and

Téléchargements : 48   Taille : 165 kb   Fabricant : FEIN Power Tools  
Catégorie : Les machines à rectifier

Téléchargements : 0   Taille : 146 kb   Fabricant : FEIN Power Tools  
Catégorie : Les machines à rectifier

Téléchargements : 2   Taille : 142 kb   Fabricant : FEIN Power Tools  
Catégorie : Les machines à rectifier

Téléchargements : 0   Taille : 150 kb   Fabricant : FEIN Power Tools  
Catégorie : Les machines à rectifier

Téléchargements : 5   Taille : 194 kb   Fabricant : FEIN Power Tools  
Catégorie : Les machines à rectifier
@name

Authorized repair centers have trained repair technicians and equipment necessary to per-form these repairs. Service or repairs performed by unqualified persons could result in operator injury. For the location of the repair center near you, please call 1-800-441-9878. Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at and follow the link to “Authorized Warranty Repair Centers” FEIN Power Tools 1030 Alcon Street Pittsburgh, PA 15220 Phone: 412-922-8886 Fax: 412-922-8767 Toll Free

Téléchargements : 4   Taille : 194 kb   Fabricant : FEIN Power Tools  
Catégorie : Les machines à rectifier
@name

ATURE (110V) 1 110 3-14-28-118-00-7 AIR CONDUCTING RING 1 120 3-24-16-098-00-5 COVER PLATE 1 140 4-30-70-007-00-2 SCREW 4 200,210 3-12-06-110-01-5 GEAR HOUSING 1 210 4-17-05-019-00-1 NEEDLE BEARING 1 220 3-09-01-032-00-3 SPRING 1 230 3-02-17-327-00-3 RETENTION PIN 1 240 4-06-12-137-00-8 SEALING RING 1 250 3-28-05-185-00-2 RETENTION BUTTON 1 260 3-24-19-115-00-6 BEARING PLATE 1 270 3-34-06-285-00-3 DRIVE SHAFT (5/8 X 11) 1 280 4-17-01-010-05-4 BALL BEARING 1 290 3-24-16-101-00-9 COVE





catégories