Log:
Téléchargements : 0   Taille : 3 mb   Fabricant : Bush Hog  
Catégorie : Loader
@name

Store lockpins in holes provided in operator platform. 2. OPERATE from the backhoe operator’s seat only. 3. LOWER the stabilizers until the rear of the tractor is totally supported by them. NOTE: rear tires should not come up off of the ground. See diagram on Page 11. 4. DO NOT dig near the stabilizers. 5. DO NOT touch overhead wires with any part of the backhoe. 6. DO NOT attempt to raise the tractor off the ground or move the tractor forward or backward using the backhoe dipperstick or bucket.

Téléchargements : 2   Taille : 106 kb   Fabricant : John Deere Products & Services  
Catégorie : Loader
@name

142 Ib.-ft. (192 Nm) @ 1,700 rpm Cylinders................................4 Displacement............................187 cu. in. (3.059 L) Cooling Fan..............................suction type Electrical System..........................24 volt with 30-amp alternator Batteries (two 12 volt)......................reserve capacity: 100 min. Off-Level Capacity.........................70% (35 deg.) Hydraulic System Main Pumps.............................two variable-displacement axial-piston M

Téléchargements : 21   Taille : 5 mb   Fabricant : John Deere  
Catégorie : Loader
@name

With more hydraulic flow than their highly productive predecessors, our 670G LC and 870G LC deliver faster work cycles to move more material on a gallon of fuel. Their rugged Interim Tier 4/EU Stage IIIB diesels enable you to work, wherever there's work, even in nonattainment areas. Numerous customer-inspired refinements include a more comfortable and spacious cab. And an enhanced LCD monitor with simplified navigation that lets an operator easily dial-in a wealth of machine information and fu

Téléchargements : 21   Taille : 3 mb   Fabricant : Bush Hog  
Catégorie : Loader
@name

The open-center system constantly pumps oil through the hydraulic cylinder operating valves and returns the oil to the reservoir. The closed-center system does not pump oil until there is a demand for oil from one of the hydraulic cylinders. In this case, CLOSED-CENTER means that when the operating valves which control the hydraulic cylinders are in the neutral position, there is no flow of oil through the valves. As long as the engine and pump are running, a constant stand-by oil pressure of ap

Téléchargements : 4   Taille : 898 kb   Fabricant : Servis-Rhino  
Catégorie : Loader
@name

READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. C01Cover RHINO® 1020 S. Sangamon Ave. Gibson City, IL 60936 800-446-5158 Email: parts@servis-rhino.com © 2011 Alamo Group Inc. $0.00 TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer

Téléchargements : 3   Taille : 2 mb   Fabricant : Alamo  
Catégorie : Loader
@name

5. Ensure the Tractor is equipped with a functional ROPS and seat belt and require that the employee operator securely fasten the safety belt and operate with the ROPS in the raised position at all times. 6. Forbid the employee operator to carry additional riders on the Tractor or Implement. 7. Provide the required tools to maintain the Tractor and Implement in a good safe working condition and provide the necessary support devices to secure the equipment safely while performing repairs and serv

Téléchargements : 1   Taille : 279 kb   Fabricant : John Deere Products & Services  
Catégorie : Loader
@name

Whether you work in a severe-service setting or just want to spread the risk of doing business, this is a great way to custom-fit coverage for your operation. And an extended coverage contract also travels well because it's backed by John Deere and is honored by all Deere construction dealers. Customer Support Advisors (CSAs)—Deere believes the CSA program lends a personal quality to Customer Personal Service (CPS). Certified CSAs have the knowledge and skills for helping make important decisio

Téléchargements : 2   Taille : 88 kb   Fabricant : John Deere  
Catégorie : Loader
@name

(7.08 m) Machine Width ..........................................................9 ft 6 in. (2.89 m) ENGINE......................................................................John Deere 300 Series Number of Cylinders and Displacement..............................4 cylinders, 276 cu in. (4.5 L) Air Intake System.................................................................Turbocharged Bore and Stroke...................................................................4.19 x 5.00 in. (106.4 x 1

Téléchargements : 1   Taille : 615 kb   Fabricant : Badger Basket  
Catégorie : Loader
@name

For the Future. SPECIAL FEATURES Custom Built in America. For Today. For the Future. SPECIAL FEATURES HYDRO-SCOPIC TELESCOPING BOOM EXCAVATOR ONE MACHINE DOES THE WORK OF MANY You’ll get more hard work from one Hydro-Scopic than from any other machine in your fleet because a wide variety of easily changed attachments allow an amazing range of construction and maintenance tasks. Beyond its use as a precision excavator, Hydro-Scopic can stand in for backhoes, trenchers, graders and loaders. It can

Téléchargements : 0   Taille : 995 kb   Fabricant : John Deere  
Catégorie : Loader
@name

A larger, slower-running engine and even more effi cient cooling system for long-lasting durability. Quieter, more spacious, and comfortable cab with even better visibility. And more operating weight, arm force, and lift capacity. Read on to learn more about how the 450D LC is well-armed to deliver maximum productivity and uptime. PAGES 2–3 One of a kind. Extended engine and hydraulic fl uid service intervals simplify maintenance and reduce daily operating costs. Redesigned cab combines more leg





catégories