Log:
Téléchargements : 33   Taille : 5 mb   Fabricant : Makita  
Catégorie : Machines à souder
@name@name

Whenever possible, wet-cut with water when working in concrete and stone, to bind the dust. Pre-filter (dry foam) Pre-filter (foam with air-filter oil) Only for models DPC6410 -7321 Only for models DPC8111 and 8112 If the pre-filter (1, Order No. 326 173 080) is dirty, wash Clean or replace (when cutting with high dust amounts): it out in lukewarm water with standard dishwashing liquid • Daily or MAKITA filter cleaner (Order No. 980 008 627). If using or at least every MAKITA filter cleaner, pro

Téléchargements : 7   Taille : 5 mb   Fabricant : Makita  
Catégorie : Machines à souder
@name@name

-Do not expose resin cutting discs to high humidity or rain! Do not use resin cutting discs past their use-by date (expiration date)! The date (quarter and year) is stamped on the disc’s arbor ring. EXAMPLE: 04 / 2007 This cutting disc can be used through the end of the fourth quarter of 2007, if properly stored and correctly used. Cutting metals IMPORTANT! Always wear approved respiratory protection! Materials that can release toxic substances may be cut only after notifying the proper authorit

Téléchargements : 21   Taille : 5 mb   Fabricant : Makita  
Catégorie : Machines à souder
@name@name

-Check the fuel tank cap regularly for good sealing. Observe the accident prevention instructions issued by trade associations and insurance companies. NEVER make any modifications to the Power Cut! You will only be putting your own safety at risk! Perform only the maintenance and repair works described in the instruction manual. All other work must be carried out by MAKITA Service. Use only original MAKITA spares and accessories. The use of non-MAKITA spares, accessories, or cutting discs incre





catégories