Log:
Évaluations - 3, GPA: 3.7 ( )

Instructions LG, Modèle GSA-E50L

Fabricant : LG
Taille : 174.87 kb
Nom Fichier :
Langue d'enseignement: enesde
Aller à la télécharger



Facilité d'utilisation


3. Connect the USB power cable (DC-jack type) to the External Super Multi DVD Rewriter. 4. Connect the other end of the USB power cable to your computer. • The Rewriter may get its power from the USB power. All systems may not meet USB power requirements and full performance may not be achieved. In this case, connect to the included USB power cable (DC-jack type.). • Please do connect the USB cables by any means other than specified above. Using the wrong type of cable with this drive can cause it to malfunction. When the computer is ready, confirm that the drive is detected. And then, insert the supplied software CD into the External Super Multi DVD Rewriter and install the software. • The machine does not have an ON/OFF switch. As soon as it is connected to the AC power, the power up sequence begins. The power supply cord is intended to serve as the main disconnect device. The power outlet shall be near the equipment and shall be easily accessible. • The appliance is not intended for use by young children or infirm persons without supervision. • Young Children should be supervised to ensure that they do not play with appliance. • If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture. Installation USB Power cable (DC-jack type) NOTES Connecting to computer Hardware Installation NOTES NOTES A. Using an USB 2.0 cable only. B. Using USB 2.0 Cable and USB Power cable. (DC-jack type) USB 2.0 cable USB 2.0 cable 1. Disc Tray 2. Drive activity indicators The LED used to indicate the operation of External Super Multi DVD Rewriter. 3. Stop/Eject Button 4. Emergency Eject Hole 1. Power Connector This connector is used to connect to the USB power cable. (DC-jack type) Or, this connector is used to connect to the AC Power adapter cord (5V, 2A, outside diameter: 4mm, inside diameter: 1.75mm) (Not supplied). 2. USB Connector This connector is used to connect to the USB 2.0 cable. Location and function of controls Removing the USB converter cable The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by performing the following operation. 1. Stop the application software being currently used. 2. Click the icon “ ” of the taskbar located on your screen’s bottom right side. 3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”. 4. Click “Ok” and then remove the USB converter cable. 1 2 3 4 This following is the general figure of the design of the drive. The drive’s appearance and specifications may change without prior notice. Front Rear 1 2 NOTE Don’t remove the USB 2.0 cable when the busy indicator on the drive blinks, or during computer startup. 1. Disc Tray 2. Drive activity indicators The LED used to indicate the operation of External Super Multi DVD Rewriter. 3. Stop/Eject Button 4. Emergency Eject Hole 1. Power Connector This connector is used to connect to the USB power cable. (DC-jack type) Or, this connector is used to connect to the AC Power adapter cord (5V, 2A, outside diameter: 4mm, inside diameter: 1.75mm) (Not supplied). 2. USB Connector This connector is used to connect to the USB 2.0 cable. Location and function of controls Removing the USB converter cable The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by performing the following operation. 1. Stop the application software being currently used. 2. Click the icon “ ” of the taskbar located on your screen’s bottom right side. 3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”. 4. Click “Ok” and then remove the USB converter cable. 1 2 3 4 This following is the general figure of the design of the drive. The drive’s appearance and specifications may change without prior notice. Front Rear 1 2 NOTE Don’t remove the USB 2.0 cable when the busy indicator on the drive blinks, or during computer startup. External GSA-E50N Quick Set-up Guide Super Multi DVD Rewriter GSA-E50L To install of your product, please read this guide manual carefully and completely. For the detailed owner’s manual of the drive, please refer to the CD manual. Features • Universal Serial Bus (USB) 2.0 interface for high-speed data transfer. • Buffer Under Run error protection technology • Emergency eject support • Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL, DVD-R DL and DVD-RAM drive functions into one drive. • Supports region playback control Phase II. • Supports SecurDiscTM Technology. • Supports LightScribe Direct Label Printing Technology - *Optional. * You can use a variety of Drive GSA-E50L GSA-E50N Light Scribe X I/F USB 2.0 only USB 2.0 only Package Items Item Quantity - External Super Multi DVD Rewriter 1 - USB 2.0 cable 1 - USB Power cable (DC-jack type) 1 - Software CD 1 - Quick Guide for Drive 1 Cautions System meeting the following requirements is needed in order to use USB 2.0 ope...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories